Customer Support




Find Us At



Find Us At



Thermalright AXP-100RH [Universal Socket]

Thermalright AXP-100RH [Universal Socket]
Thermalright AXP-100RH [Universal Socket] Thermalright AXP-100RH [Universal Socket] Thermalright AXP-100RH [Universal Socket] Thermalright AXP-100RH [Universal Socket] Thermalright AXP-100RH [Universal Socket] Thermalright AXP-100RH [Universal Socket] Thermalright AXP-100RH [Universal Socket]
Merek: Thermalright
Kode Produk: Thermalright AXP-100RH
Ketersediaan: Tersedia
Harga: Rp. 760.000,-
Tanpa Pajak: Rp. 760.000,-
   - ATAU -   

- Designed for ITX and HTPC systems
- Total height is only 65mm (2.55 inches) including the TY-100R fan
- The adjustable Enhanced Fan Mount is capable of mounting Thermalright’s TY-14x series fans
- Full nickel plating of the six heatpipes and heatsink body ensures optimal anti-oxidization
- Supports all modern CPU sockets and platforms

Motherboard Compatibility
- Intel : Socket LGA 775/1150/1151/1155/1156/1366/2011/2011-3/2066
- AMD : Socket AM2/AM2+/AM3/AM3+/AM4/FM1/FM2/FM2+

Heatsink Specification
- Dimension : L105 mm x W121 mm x H51 mm
- Weight : 320g
- Heat pipes : 6mm heatpipe x 6 units
- Fin : T = 0.5 mm ; Gap = 1.9 mm
- Fin Pcs : 28 + 6 + 5 = 39 pcs
- Copper Base : C1100 Pure copper nickel plated
- Motherboard to Fin : 27 + 8 = 35 mm
- Thermal design power : 180watt

TY-100R Fan Specification
- Dimension : L108 mm x W101 mm x H14 mm
- Weight : 40g
- Rated Speed : 900~2500RPM±15%
- Noise Level : 22~30 dBA
- Air Flow : 16.0~44.5CFM Click to enlarge

- If your mainboard has larger components or protruding pins on the backside, causing interference when installing the AXP-100’s mounting backplate
- You can choose to install your AXP-100 without the backplate as showed below.
- If the backside of your mainboard has push pins or components like the photo above
- The mounting backplate may interfere and be un-leveled
- In this case please install your mounting bracket as instructed below
- First pass the M3L10 screws through the Intel Washers
- Pass the M3L10 screws through the backside of the mainboard

- When I install the AXP-100 Series on a ITX mainboard, but also want to install a TY-100R series fan
- How can I avoid interfering the graphics card with the larger fan?

- The Enhanced Fan Mount bundled with the AXP-100 Series can be adjusted in all four directions
- So when you use a larger fan like the TY-100R Series
- You can slide the Enhanced Fan Mount to the opposite direction to avoid the graphics card or tall heatsink RAM

- I bought an ITX mainboard, and also your AXP-100 series
- However, now I want to add an extra VGA/GPU card, are all VGA cards compatible?

- The AXP-100 is compatible with “almost” all VGA cards
- The only type of VGA card to watch out for, are special cards which have heatsinks or components extending to the back of the card(most are cards with passive cooling)
- These types of cards are not compatible with the AXP-100
- My case is a Lian-Li Q03. After installing my AXP-100, I found that the cooler’s TY-100 fan is very close to the PSU
- In fact the PSU’s pull fan is directly on top of the AXP-100’s fan. In this case should I mount the fan in a push or pull direction (towards the heatsink)?

- If you’re using the Q03 case or a similar system setup, where the PSU’s pull exhaust fan is very close and directly above the AXP-100
- Then we suggest to mount the TY-100 in reverse pulling air from the heatsink
- This creates a wind tunnel effect, pulling hot air straight out of the case and in turn increasing overall performance

- What is difference in this upgrade version on AXP-100RH?

- In 2016, Asus ROG M8i motherboard sound card is bigger now
- So Thermalright team designed the Enhanced Fan Mount can be X/Y axis adjustable and newest height 65mm with fans of heatsinks
- To make it perfect for all the motherboard even the ROG M8i
- Now all the players can easily install the Thermalright’s award-winning TY-14x series of 140mm or 120mm fans as well and without concern about the space issues now


Red Mangoes ©2018